Display
&©|61623; Screen Type:
High-resolution
display
&©|61623; Screen Size: 7
inches (17.7
cm) diagonally
&©|61623; Sweep Speed: 25mm/sec
&©|61623; Information: Heart Rate, Lead/Pads, Alarm On/Off, SpO2,
AED
&©|61623; Functions and Prompts Alarm Selection and Limits,
Delivered Energy.
Defibrillator
&©|61623; Waveform: Biphasic
&©|61623; Charge Time: Less than 7 seconds with a new fully charged
battery.
&©|61623; Energy Display: Monitor display indicates both selected and
delivered energy.
&©|61623; Charge Prompt Type: Voice and visual prompts.
&©|61623; Electrode Impedance Measurement Range: 0-250 ohms.
ECG Monitoring
&©|61623; Patient Connection: 3-lead ECG cable, or 5-lead ECG
cable, paddles.
&©|61623; Lead Selection: Displayed on monitor, paddles, I, II, III,
AVR, AVL, AVF, V.
&©|61623; ECG Size: 0.25, 0.5, 1, 1.5, 2, 4 cm/mV display on monitor.
&©|61623; Heart Rate: 20-300BPM.
&©|61623; Heart Rate Alarm: On/Off displayed on monitor,
user-selectable.
&©|61623; Smart Alarms: Beeper/voice prompts indicate shock able
rhythm.
Battery
&©|61623; Type: Rechargeable, Ni-MH
battery, 12V.
&©|61623; Operating Time: For a new,
fully charged battery: 60
defibrillator discharges at
maximum energy, or 3 hours minimum of continuous ECG
monitoring. Additional parameters will effect operating time
with different functions
SpO2 Module (Options):
&©|61623; Measurement Range: 30~100%, ¡À2% between 80%~90%,
others ¡À5%
&©|61623; Alarm Range: User set high limit and low limit.
&©|61623; Alarm Accuracy: ¡À10% within setting values.
&©|61623; Alarm time Accuracy: less than 12 sec.
Recorder
&©|61623; Paper: 50mm thermal.
&©|61623; Speed: 12.5mm/sec, 25mm/sec, 50mm/sec. User-selectable
6-second delay.
&©|61623; Printing Method: High-resolution, thermal print head.
&©|61623; Print-out Modes: Manual or automatic, user-configurable.
&©|61623; On/Off Control: Front panel and paddle.
&©|61623; Automatic Function:
9-seconds recording initiated
by alarm activation or
defibrillator charge or
defibrillator discharg |
Home
